Pvdm installation and removal, Pvdm location and orientation, Pvdm installation and removal” procedure on – Cisco 3800 Series User Manual
Page 126: Figure 63
96
Installing and Upgrading Internal Components in Cisco 3800 Series Routers
OL-5975-04
PVDM Installation and Removal
Figure 63
CompactFlash Memory Card Installation on the AIM
PVDM Installation and Removal
Cisco 3800 series routers hold up to four Cisco packet voice data modules, version II (PVDM-II), to
support enhanced versions of digital signal processors (DSPs).
Caution
When you remove or install PVDMs, always wear an ESD-preventive wrist strap, and ensure that it
makes good contact with your skin. Connect the equipment end of the wrist strap to the metal part of the
router.
Caution
Handle PVDMs by the edges only. PVDMs are ESD-sensitive components and can be damaged
by mishandling.
PVDM Location and Orientation
The four PVDM connectors are located on the motherboard and are identified as PVDM0, PVDM1,
PVDM2, and PVDM3. See
and
for PVDM locations. PVDMs have a polarization
notch on the mating edge to prevent incorrect insertion.
shows the polarization notch on a
PVDM.
120376