Tweco VA 4000 Ultra-Feed - Manual (Page 50)

ULTRAFEED VA 4000
A-2 March 17, 2006
APPENDIX 2: OPTIONS AND ACCESSORIES
KITS PART NO. DESCRIPTION
Dual Schedule Kit W4008001 Provides a second schedule for wire feed speed and voltage
Advanced Interface Kit 870379
19 pin plug; start/stop; schedule select; inch & purge inputs; arc
standby & fault outputs; 0-10VDC analog input
ACCESSORIES
Drive Roll Kits 375980-XXX One kit (#375980-083) is supplied standard with each wire
feeder, see drive roll kit chart to select a different drive roll style
Control Cable 6 ft (1.8m) 374878-006
Control cable from wire feeder to power source (A 6ft.control
cable #374878-006 is supplied with the wire feeder)
15ft (4.5m) 374878-015
25ft (7.6m) 374878-025
50ft (15.2m) 374878-050
100ft (30.5m) 374878-100
Interconnect Cable Assembly
6 ft (1.8m)
W4009200
Complete interconnect assembly from wire feeder to power
source, includes control cable, welding power cable and gas
hose in a sheathed cover.
15ft (4.5m) W4009201
25ft (7.6m) W4009202
50ft (15.2m) W4009203
Wire Spool Adaptor 10 lb (4.5kg), 8”
spool
375585-001
15 lb (6.8kg), 8” spool 375864-001
Spool Cover 30 lb (13.6kg) spool 375582A-004
60 lb (27.2kg) spool 375733A-001
Wire Reel Kit 870059
Wire Coil Adaptor 14 lb (6.4kg) coil 375942A
60 lb (27.3kg) coil 407142A
Wire Feeder Cart W4000001
Lift Eye Kit W4002001 Electrically isolated
MIG Gun Adaptor Kits Tweco® #5 870395
Miller® 870397
Euro-style 171449
Cable Adapters 19 pin wire feeder to
5 pin power source
870000-001 For older style power sources
19 pin wire feeder to 14 pin power
source
870093B-001 For Miller® or 14 pin style power sources