20 install remote arc starter, Install remote arc starter -32, Ultra-cut 200 xt – Tweco 200 XT Ultra-Cut Plasma Cutting System With Automated Gas Control User Manual

Page 56

Text mode
Original mode

ULTRA-CUT 200 XT

3-32

INSTALLATION

Manual 0-5304

3.20 Install Remote Arc Starter

Site Location

Select a clean, dry location with good ventilation and adequate working space around all components.

Review the safety precautions in the front of this manual to be sure that the location meets all safety requirements.

Interconnecting cables and hoses attach to the Arc Starter. There must be adequate space around the Arc Starter
for these connections without excessive kinking or bending.

Mounting Dimensions

NOTE

Height not shown is 7.375” ( 187mm )

38.10mm

1.50in

190.50mm

7.50in

50.80mm

2.00in

203.20mm

8.00in

50.80mm

2.00in

38.10mm

1.50in

Art # A-12058