Tweco Dynamics Automation - Manual (Page 16)

Power Supply Status Codes
Auto-Cut and Ultra-Cut systems display system status codes that are useful for
optimizing system performance and for troubleshooting. The status code is displayed on
the power supply front panel.
Art # A-04862
AC Indicator
Temp Indicator
Gas Indicator
DC Indicator
Status Indicator
Refer to the Status Code Section for details. On power supply start-up, the indicator
flashes to show the revision level of the operating software installed in the system.
Indicates AC power is being supplied to the system when the
ON/OFF switch is in ON position. When switch is first set to
ON, the indicator will blink, indicating gas purge at power on.
AC Power Indicator:
TEMP Indicator: Normally OFF. Indicator will come ON when the internal
temperature sensors detect temperatures above normal limits.
Let the unit cool before continuing operation.
Normally ON. Indicates adequate gas pressure for
operation in the system.
GAS Indicator:
DC Indicator: Indicates the power supply is generating output DC voltage.
Show system status. The number of flashes indicates the
status.
Status Indicator:
page 1