Tweco SC11 User Manual

Page 23

Manual 0-2556

3-7

INSTALLATION PROCEDURES

B. Torch Assembly Installation

1. Place the end of the mounting pin on the Torch Mount-

ing Tube Assembly into the Torch Holder Pivot.

2. Tighten the wing nut and washer to secure the Torch

Mounting Tube Assembly to the Lifter Motor Assem-
bly.

3. Route the Torch Leads up and over the Hose Holder

(Torch Leads Support Bracket). Leave some slack in
the Torch Leads between the Mounting Tube and the
Hose Holder.

Standoff Distance

Straight Arc

Trailing Arc

Leading Arc

Direction of Torch Travel

Shown with

Rack and Pinion

Mounting Assembly

A-01556

Figure 3-11 Lifter Motor and Torch Mounting

4. Connect the end of the Torch Leads per the appropri-

ate Torch Manual.