Tweco PCM-120 Machine Torch - Manual (Page 44)

PARTS LISTS 6-4 Manual 0-2698
6.04 Replacement Machine Torch Parts
Item # Qty Description Catalog #
1 1 Insulator, Torch Leads 9-7828
2 1 Assembly, Basic Head, PCM-120 180° (See Note 2) 9-6410
3 1 Distributor, Gas - Cutting 20-1215
1 Distributor, Gas - Gouging 20-1409
4 1 Tip, Cutting, Air/N2/Ar-H2, 0.031" Orifice, 35 Amps 20-1220
1 Tip, Cutting, Air/N2/Ar-H2, 0.047" Orifice, 70 Amps 20-1221
1 Tip, Cutting, Air/N2/Ar-H2, 0.063" Orifice, 120 Amps 20-1222
1 Tip, Gouging, Air/N2/ArH2, 0.110" Orifice 20-1412
1 Tip, Gouging, Air/N2/ArH2, 0.125" Orifice 20-1413
1 Tip, Gouging, Air/N2/ArH2, 0.156" Orifice 20-1414
1 Tip, Gouging, Air/N2/ArH2, 0.171" Orifice 20-1415
5 1 Electrode, Cutting Air/N2 20-1210
1 Electrode, Cutting N2/Ar-H2 20-1211
1 Electrode, Gouging, Air/N2 20-1404
1 Electrode, Gouging, N2/Ar-H2 20-1405
6 1 Shield Cup, Short 20-1225
1 Shield Cup, Crown 20-1226
1 Shield Cup, Gouging 20-1227
7 1 Water Tube Extension (Gouging Only) 20-1402
8 1 Leads Assembly
Unshielded (Refer to Section 6.05 for Leads Component Parts)
25 ft (7.6 m) Length 4-6090
50 ft (15.2 m) Length 4-6091
Shielded
25 ft (7.6 m) Length 4-9026
50 ft (15.2 m) Length 4-9051
9 1 Adapter, 1-3/8 O.D. Torch to 1-3/8 Positioning Tube 8-2158
10 1 Tube, Positioning, 1-3/8, With Rack 7-3207
11 1 Positioning Tube End Cap (Molded) 8-4204
1 Pinion Assembly includes: 7-2827
12 1 Torch Holder Sleeve 7-2896
13 1 Pinion Gear-Short 8-6074
14 1 Handwheel (Torch Holder) 9-4514
15 1 Low Profile Torch Holder (1 3/8 Dia) w/o Hardware 9-4515
16 1 Calibrated Torch Holder Bushing 9-4366
17 1 5/32 Dia x 5/8 Lg Slotted Spring Pin See Note 1
18 1 3/8-24 x 3/8 Soc Hd Set Screw, Cup Point See Note 1
19 2 1/4-20 x 5/8 Hex Socket Head Screw See Note 1
20 1 #10-24 x 3/8 Hex Socket Set Screw, Cup Point See Note 1
21 1 Shrink On Tubing (Refer to Note 2) 9-9092
Note 1 Item may be purchased locally.
Note 2 Shrink On Tubing for the Torch Leads is required when replacing the Torch Head or Leads