tekmar 664 Snow Detector & Melting Control Installation - Manual

1 of 36 © 2009 D 664 - 07/09
- Data Brochure
Snow Detector & Melting Control 664
D 664
07/09
The Snow Detector and Melting Control 664 is designed to control up to two zones in a snow melting system. The control automatically
adjusts the mixed supply water to the snow melting system by controlling up to two boilers and a single mixing device. For mixing, the
664 can use a variable speed injection pump, a fl oating action mixing valve or a 4-20 mA device. The snow melting system may be
started manually or automatically through the use of a Snow / Ice Sensor 090. The 664 control includes a large Liquid Crystal Display
(LCD) in order to view system status and operating information.
Additional features include:
1
+
2
–
3
Opn/ 4-20 mA
Var
4
Pwr
Mix
5
Cls
6
Red
7
Blk/
Com
8
Blu
9
Yel
10
Brn/
Slab1
11
Slab
2
12
Com
13
tN2
14
Mix
Ret
15
Mix
Sup
16
Com
17
Boil
18
Out
19
Melt/Idle
Demand
20 21
1
22 23
2
24 25
Zn
1
26
Com
Zn
27
Zn
2
28 30
Sys
P1
29
Power
L N
Menu
Test
Snow Detector & Melting Control 664
Two Zone, Two Stage Boiler, Mixing
Item
Start Stop
Idle Demand
Signal wiring must be rated at least 300 V.
Melt Demand
not testing
testing
testing paused
For maximum heat,
press and hold Test
button for 3 seconds.
Made in Canada by
tekmar Control Systems Ltd.
tektra 900-01
Power 115 V ± 10% 50/60 Hz 600 VA
Relays 230 V (ac) 5 A 1/6 hp
Stage/Zn/P1 Relays 230 V (ac) 5 A 1/3 hp
Var. Pump
230 V (ac) 2.4 A max (FLA)
5 A max (LRA), fuse T2.5 A 250V
Demand 20 to 260 V (ac) 2 VA
Meets Class B:
Canadian ICES
FCC Part 15
off
red
red
Do not apply power 1 kΩ max
%
Output
4-20 mA
device
Output
Variable
Speed
driven
pump
Output
Mixing
Valve &
Actuating
Motor
Input
Snow/Ice Sensor
090 installed with
Sensor Socket
091 Optional
Input
Slab
Sensor
Optional
Input
Remote Display Module (RDM)
or
Remote Start / Stop Module
Slab
Sensor
Optional
OR
OR
or
OR
OR
Input
Universal
Sensor
Included
Input
Universal
Sensor
Included
Input
Universal
Sensor
Included
Input
Outdoor
Sensor
Included
Input
Melt/Idle
Demand
Output
Boiler
Output
Boiler
Output
Zone
Pumps
Zone Valves
Output
System
Pump
Input
115 V (ac)
Power
Supply
OR
Melt Demand
Idle Demand
WWSD
Minimum
Maximum
Water
Melting
M
H1
198D Stage Stage
• Temporary Idle
• Optional priority zoning operation
• Slab protection for the snow melting system
• Boiler protection
• Manual Override
• Adjustable Warm Weather Shut Down (WWSD)
• Cold Weather Cut Out (CWCO)
• Remote display and adjustment capabilities
• Test sequence to ensure proper component operation
• Pump and valve exercising
• CSA C US Certifi ed (approved to applicable UL standards)