tekmar 557 Thermostat Installation - Manual (Page 23)

© 2014 557_D - 09/14
23 of 52 A Watts Water Technologies Company
Setting Display
COOL W2 HOURS
The total number of hours the W2 relay has been
operated for cooling. Touch the number and the
ENTER key to reset.
Access Level: Installer, User
Range: 0000 to 9999 hours
Conditions: Setup menu setting BACKUP W2 SOURC
is set to TANK and BACKUP W2 TERM is set to
COIL.
Default: 0000 hours
FAN HOURS
The total number of hours the fan has been operated.
Touch the number and the ENTER key to reset.
Access Level: Installer, User
Range: 0000 to 9999 hours
Conditions: Always available. Default: 0000 hours
HUMIDIFY HOURS
The total number of hours the humidifier has been
operated. Touch the number and the ENTER key
to reset.
Access Level: Installer, User
Range: 0000 to 9999 hours
Conditions: Setup menu setting ACC RELAY is set
to HUM.
Default: 0000 hours
DEHUMIDIFY HOURS
The total number of hours the dehumidifier has
been operated. Touch the number and the ENTER
key to reset.
Access Level: Installer, User
Range: 0000 to 9999 hours
Conditions: Setup menu setting ACC RELAY is set
to DHUM or Y2 RELAY is set to DHUM.
Default: 0000 hours
Monitor Menu (5 of 5)
Setting Display
ACCESS LEVEL
Selects the access level of the thermostat, which determines
which menus and items are available.
Access Level: Installer, User, Limited, Secure
Range: INST (installer),
USER, LTD (limited), SEC
(secure)
Conditions: Adjustable only when thermostat switch setting
set to UNLOCK OR tekmarNet
® system control switch setting
set to UNLOCK.
Default: INST
Toolbox Menu (1 of 3)