tekmar 400 House Control Installation - Manual (Page 32)

Limited Warranty The liability of tekmar under this warranty is lim-
ited. The Purchaser, by taking receipt of any tekmar product (“Prod-
uct”), acknowledges the terms of the Limited Warranty in effect at
the time of such Product sale & acknowledges that it has read &
understands same.
The tekmar Limited Warranty to the Purchaser on the Products sold
hereunder is a manufacturer’s pass-through warranty which the Pur-
chaser is authorized to pass through to its customers. Under the
Limited Warranty, each tekmar Product is warranted against defects
in workmanship & materials if the Product is installed & used in com-
pliance with tekmar’s instructions, ordinary wear & tear excepted.
The pass-through warranty period is for a period of twenty-four (24)
months from the production date if the Product is not installed during
that period, or twelve (12) months from the documented date of instal-
lation if installed within twenty-four (24) months from the production
date.
The liability of tekmar under the Limited Warranty shall be limited to, at
tekmar’s sole discretion: the cost of parts & labor provided by tekmar to
repair defects in materials &/or workmanship of the defective product;
or to the exchange of the defective product for a warranty replacement
product; or to the granting of credit limited to the original cost of the defec-
tive product, & such repair, exchange or credit shall be the sole remedy
available from tekmar, &, without limiting the foregoing in any way, tekmar
is not responsible, in contract, tort or strict product liability, for any other
losses, costs, expenses, inconveniences, or damages, whether direct,
indirect, special, secondary, incidental or consequential, arising from
ownership or use of the product, or from defects in workmanship or mate-
rials, including any liability for fundamental breach of contract.
The pass-through Limited Warranty applies only to those defective Prod-
ucts returned to tekmar during the warranty period. This Limited War-
ranty does not cover the cost of the parts or labor to remove or transport
the defective Product, or to reinstall the repaired or replacement Product,
all such costs & expenses being subject to Purchaser’s agreement &
warranty with its customers. Any representations or warranties about the Products made by Purchaser
to its customers which are different from or in excess of the tekmar Lim-
ited Warranty are the Purchaser’s sole responsibility & obligation. Pur-
chaser shall indemnify & hold tekmar harmless from & against any & all
claims, liabilities & damages of any kind or nature which arise out of or
are related to any such representations or warranties by Purchaser to its
customers.
The pass-through Limited Warranty does not apply if the returned Prod-
uct has been damaged by negligence by persons other than tekmar,
accident, fire, Act of God, abuse or misuse; or has been damaged by
modifications, alterations or attachments made subsequent to purchase
which have not been authorized by tekmar; or if the Product was not
installed in compliance with tekmar’s instructions &/or the local codes
& ordinances; or if due to defective installation of the Product; or if the
Product was not used in compliance with tekmar’s instructions.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, WHICH THE GOVERNING LAW ALLOWS PARTIES TO
CONTRACTUALLY EXCLUDE, INCLUDING, WITHOUT LIMITATION,
IMPLIED WARRANTIES OF MERCHANTABILITY & FITNESS FOR A
PARTICULAR PURPOSE, DURABILITY OR DESCRIPTION OF THE
PRODUCT, ITS NON-INFRINGEMENT OF ANY RELEVANT PATENTS
OR TRADEMARKS, & ITS COMPLIANCE WITH OR NON-VIOLATION
OF ANY APPLICABLE ENVIRONMENTAL, HEALTH OR SAFETY LEG-
ISLATION; THE TERM OF ANY OTHER WARRANTY NOT HEREBY
CONTRACTUALLY EXCLUDED IS LIMITED SUCH THAT IT SHALL NOT
EXTEND BEYOND TWENTY-FOUR (24) MONTHS FROM THE PRODUC-
TION DATE, TO THE EXTENT THAT SUCH LIMITATION IS ALLOWED BY
THE GOVERNING LAW.
Product Warranty Return Procedure All Products that are believed to
have defects in workmanship or materials must be returned, together
with a written description of the defect, to the tekmar Representative
assigned to the territory in which such Product is located. If tekmar
receives an inquiry from someone other than a tekmar Representative,
including an inquiry from Purchaser (if not a tekmar Representative) or
Purchaser’s customers, regarding a potential warranty claim, tekmar’s
sole obligation shall be to provide the address & other contact informa-
tion regarding the appropriate Representative.
Product design, software & literature are Copyright ©2013 by tekmar
Control Systems Ltd., A Watts Water Technologies Company 32 of 32 All specifications are subject to change without notice.
Printed in Canada. 400_D - 09/13.
tekmar Control Systems Ltd., A Watts Water Technologies Company. Head Offi ce: 5100 Silver Star Road,
Vernon, B.C. Canada V1B 3K4, 250-545-7749, Fax. 250-545-0650 Web Site: www.tekmarControls.com
Technical Data
tN2 House Control 400 Boiler, DHW & Setpoint, Four Zone Valves
Literature 400_D, 400_Q, 400_C
Control Microprocessor control. This is not a safety (limit) control.
Packaged weight 1.4 lb (640 g)
Dimensions 5.5" H x 5.5" W x 2.25" D (140 x 140 x 57 mm)
Enclosure Blue PC+ABS plastic, NEMA type 1
Approvals CSA C US, meets class B: ICES & FCC Part 15
Ambient conditions Indoor use only, 32 to 104°F (0 to 40°C), RH 90% Non-condensing
Power supply 24 V (ac) ±10% 60 Hz, 100 VA max, Class 2
Control load 2 VA
Zone valve load 89 VA, 24 V (ac), 3.7 A for zones 1 to 4
Boiler stage 1, 2 relays 24 V (ac) 5 A
Pump relays 115 V (ac) 5 A, 1/6 hp
Setpoint and DHW calls Short, 0 - 32 V (ac)
Boiler modulating output 0 - 10 V (dc) 500 Ω min load impedance, 4 - 20 mA 1 kΩ max load impedance
Sensors NTC thermistor, 10k @ 77°F (25°C ± 0.2°C) ß=3892
- Included Outdoor Sensor 070 and Universal Sensor 082
- Optional tekmar type#: 033, 479
Warranty Limited 3 Year Warranty
Limited Warranty and Product Return Procedure