tekmar 369 Zone Control User Manuals - Manual (Page 5)

Copyright © U 369 -10/00 5 of 8
*Note: Depending on the settings the installer makes in the control, control menu items may not appear.
A display RTU may be connected to the Zone Control 369 in order to provide the control with indoor temperature
feedback for the heating system (Refer to Essay E 002). When using display RTUs, several items related to the
system are no longer available in the control’s User Interface. These items are available only in the RTU’s User
Interface. Also, the number of items that are available on the RTU depends on the type of RTU that is connected
to the control.
Room Temperature Units (RTUs) 062 and 063
369 RTU View Menu
LT
D
USER
Average temperature of all the zones assigned to the cooling group.
– – –, 20 to 120 °F
(7 to 49 °C)
– – –, 20 to 120 °F
(7 to 49 °C)
– – –, 35 to 100 °F
(2 to 38 °C)
-67 to 140
°F
(-55 to 60
°C)
-40 to 158 °F
(-40 to 70 °C)
Current room air temperature.
Target room air temperature.
Current outdoor air temperature.
Current slab (floor) sensor temperature. This item is only
available if a tekmar slab sensor is connected to an RTU 063.
Range Item
062 063
369 RTU Adjust Menu
LT
D
USER
The operating mode for this zone. OFF, HEAT
35 to 100 °F
(2 to 38 °C)
OFF, HEAT, AUTO,
COOL
35 to 100 °F
(2 to 38 °C)
35 to 100
°F
(2 to 38
°C)
35 to 100
°F
(2 to 38
°C)
OFF, 35 to 120 °F
(OFF, 2 to 49 °C)
The operating mode for this zone. This item is available for
RTU 6 if cooling operation is selected.
The desired heated room air temperature during an occupied
period for this zone.
Note: There is only a ±3°F (±1°C)
adjustment in the LTD access level.
The desired heated room air temperature during an unoccupied
period for this zone.
Note: There is only a ±3°F (±1°C)
adjustment in the LTD access level.
The desired cooled room air temperature during an occupied
period.
Note: There is only a ±3°F (±1°C) adjustment in the
LTD access level.
The desired cooled room air temperature during an unoccupied
period.
Note: There is only a ±3°F (±1°C) adjustment in the
LTD access level.
The minimum target temperature at the slab sensor. This item
can only be adjusted if a tekmar slab sensor is connected to
an RTU 063,
Occ
Range Item
062 063
UnOcc
Occ
UnOcc
Item Menu
UnOcc 1
°F
View