tekmar 356 Mixing Control - Manual (Page 12)

Copyright © D 356 -0
9/08
12 of 16
The desired room air temperature.
(OUTDR DSGN
≠
OFF)
35 to 100 °F
(2 to 38 °C) B2
Mixing setpoint temperature.
(OUTDR DSGN = OFF) OFF, 60 to 200
°F
(OFF, 16 to 93 °C) B2
The design outdoor air temperature used in the
heat loss calculation for the heating system. For
setpoint operation, set the OUTDR DSGN to OFF.
-60 to 32 °F, OFF
(51 to 0
°C, OFF) B2
Section Advanced Installer
Display Description Range
Actual
Setting
The type of terminal units that are being used in the
heating system.
(OUTDR DSGN
≠
OFF)
B2
1 (High Mass Radi-
ant), 2 (Low Mass
Radiant), 3 (Fancoil),
4 (Fin-tube Convec-
tor), 5 (Radiator),
6 (Baseboard)
Current outdoor air temperature as measured by the outdoor
sensor. This is also the default display for the control.
(OUTDR DSGN
≠
OFF)
-67 to 149 °F
(-55 to 65
°C)
Section Advanced Installer
Display Description Range
Current mixed supply water temperature as measured by the
mixing sensor. 14 to 266 °F
(-10 to 130
°C) B3
Current boiler temperature as measured by the boiler sensor.
(Boiler sensor is present) 14 to 266 °F
(-10 to 130
°C)
Target mixed supply is the temperature the control is currently
trying to maintain at the mixing sensor. ---, 14 to 266 °F
(---, -10 to 130 °C)
B1
B2
B3
View Menu (1 of 1)
Adjust Menu (1 of 2)
ADJUST
ROOM
° F
ADJUST
TARGET
MIX
° F
ADJUST DSGN OUTDR
° F
Terminal Unit
ADJUST
The design indoor air temperature used in the heat
loss calculation for the heating system.
(OUTDR DSGN
≠
OFF)
35 to 100 °F
(2 to 38 °C) B3
The design supply water temperature used in the
heat loss calculation for the heating system.
(OUTDR DSGN
≠
OFF)
70 to 220
°F
(21 to 104 °C) B3
ADJUST
INDR
MIX
° F
ADJUST DSGN
MIX
° F
VIEW
BOIL ° F
VIEW OUTDR
° F
VIEW
MIX
° F
VIEW
TARGET
MIX
° F