Operation precautions, Power source, Operating environment – Sindoh D202 User Manual
Page 29: Storage of copies, Operation precautions -19, Power source -19, Operating environment -19, Storage of copies -19
1
-19
Introduction
1
8. Operation precautions
To ensure the optimum performance of this machine, observe the precautions described below.
Power source
The power source requirements are as follows.
-
Voltage fluctuation : Maximum ± 10% (at 110 V/120 V/220 to 240 V AC)
- Frequency fluctuation : Maximum ± 3 Hz (at 50 Hz/60 Hz)
-
Use a power source with as little voltage or frequency fluctuations as possible.
Operating environment
The environmental requirements for correct operation of the machine are as follows.
- Temperature : 50°F (10°C) to 86°F (30°C) with fluctuations of no more than 18°F (10°C) within an hour
- Humidity : 15% to 85% with fluctuations of no more than 10% within an hour
Storage of copies
To store copies, follow the recommendation listed below.
-
Copies that are to be kept for a long time should be kept where they are not exposed to light in order to
prevent them from fading.
- Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies.
- Color copies have a thicker layer of toner than normal black-and-white copies. Therefore, when a color
copy is folded, the toner at the fold may peel off.