Sindoh D202 - Manual (Page 15)

1
-5
Introduction
1
Disassemble and modification
Symbol Description
WARNING
Do not modify this product, as a fire, electrical shock, or
breakdown could result. If the product employs a laser,
the laser beam source could cause blindness.
Do not attempt to remove the covers and panels which
have been fixed to the product. Some products have a high-
voltage part or a laser beam source inside that could cause
an electrical shock or blindness.
Power cord
Symbol Description
WARNING
Use only the power cord supplied in the package. If a power
cord is not supplied, only use the power cord and plug that
is specified in POWER CORD INSTRUCTION. Failure to use
this cord could result in a fire or electrical shock.
Do not use the power cord other than being supplied in the
package. If a power cord is not supplied, only use the power
cord and plug that is specified in POWER CORD INSTRUCTION.
Failure to use this cord could result in a fire or electrical shock.
Do not scratch, abrade, place a heavy object on, heat, twist,
bend, pull on, or damage the power cord. Use of a damaged
power cord (exposed core wire, broken wire, etc.) could
result in a fire or breakdown. Should any of these conditions
be found, immediately turn OFF the powerswitch, unplug
the power cord from the power outlet, and then call your
authorized service representative.