Sindoh D202 - Manual (Page 22)

Introduction
1
-12
Laser safety
This is a digital machine which operates using a laser. There is no possibility of danger from the laser provided the
machine is operated according to the instructions in the manuals.
Since radiation emitted by the laser is completely confined within protective housing, the laser beam cannot escape
from the machine during any phase of user operation.
This machine is certified as a Class 1 laser product: This means the machine does not produce hazardous laser radiation.
Internal laser radiation
Maximum Average Radiation Power : 6.0 μW at the laser aperture of the print head unit.
Wavelength : 770-800 nm
This product employs a Class 3B laser diode that emits an invisible laser beam.
The laser diode and the scanning polygon mirror are incorporated in the print head unit. The print head unit is
NOT A FIELD SERVICE ITEM :
Therefore, the print head unit should not be opened under any circumstances.
Laser Aperture of
the Print Head Unit
Print Head
CDRH regulations
This machine is certified as a Class 1 Laser product under Radiation Performance Standard according to the
Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser products marketed in the United
States and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration of the U.S. Department of Health and Human Services (DHHS). This means that the device
does not produce hazardous laser radiation.
The label shown on page
1-11 indicates compliance with the CDRH regulations and must be attached to
laser products marketed in the United States.