Kessler MOTION CONTROL: Oracle Controller Full (2.06.2 SL) - Manual (Page 13)

SLIDER/DOLLY RECORD & PLAYBACK
MOTION CONTROL - LIVE RECORDING
CONTINUED
10. To stop recording press the same memory bank BUTTON
(1, 2, OR 3) you chose earlier or press the MIDDLE JOYSTICK
BUTTON.
11. To play back your recorded movement, press the BUTTON
(1, 2, OR 3) for the memory bank you recorded under.
12. The screen will prompt you to return the carriage to the start
position.
13. Use the joystick to move the carriage to your marked start
position.
14. Press your memory bank BUTTON (1, 2, OR 3) again to start
playback. The screen will display Playback with the selected
memory bank and seconds counter.
15. To cancel the playback, move the joystick on the ORACLE and
you will be returned to the home screen.
Please Return to
Start Position
Playback
1 25.45 S
Quick Tip:
When beginning a camera move recording, you can press the
centerbutton on the joystick to start a recording without moving the
camera. This is useful if you want to create a time delay before camera
movement starts.
Quick Tip:
The Joystick can be moved during a recorded playback to stop all
playback moves immediately. It acts as an “emergency brake” during
live playback to prevent accidental damage.
13