Gossen Starlite - Manual (Page 30)

30 GOSSEN Foto- und Lichtmeßtechnik
9.3 Setting the shutter angle
The shutter angle in the Starlite is preset at the
factory to 180°.
If you are working with other angles which vary
from the shutter angle 180°, you can enter these
directly.
Therefore, no need for lengthy calculation.
– Simultaneously press both function buttons
( and ).
The current angle appears in the right display.
– Set the required angle in 5° stop increments
using the setting wheel.
– By pressing a function button ( or ) you
move back into the measuring function.
The selected angle is shown in the display
with the symbol
.
A shutter angle other than 180° has a direct
influence on all measuring functions in the CINE
function; corrected measuring values are shown
directly in the display.
These angle correction values do not influence
the measuring results in the photometry func-
tion. Unlike in the photo functions, correction
entries cannot be made here.