Gossen Starlite - Manual (Page 28)

28 GOSSEN Foto- und Lichtmeßtechnik
8.1.1 Measuring correction values
Correction values can also be measured directly.
An evenly illuminated surface and constant light
level are required.
Use the Starlite in the reflected light mode at
1° or 5°.
In the function
, a reference measurement
can be taken by pressing the measuring button .
Designation rF - - in the digital display.
Then, hold the filter in front of the viewfinder and
press the measuring button
.
The light reducing effect will be indicated automa-
tically in the display as EV stop and extension
factor.
8.1.2 Deleting correction values
In the function
correction values (chapter 8.1,
page 27) you have two possibilities of deleting
pre-programmed correction values:
– by manually resetting using the setting wheel to
EV 0 and extension factor 1.0 or
– by pressing the measuring button
(display rF - -)
– quit the correction value function using the
function button ( or )
Correction value is deleted.
Symbol
has disappeared from the display.