Gossen Starlite User Manual
Page 29
GOSSEN Foto- und Lichtmeßtechnik
29
9
CINE meter for cinematographers – PHOTOMETRY
By actuating the DIP 1 switch, the Starlite can be
converted easily and quickly into a fully functional
CINE meter. At the same time switch on the
function photometry.
CINE meter
– Select reflected light or incident light mode at
the measuring head.
– Using the left button, press function
ambient
light .
9.1
Preselecting the Cine speeds
– Press and hold the left function button
and
using the setting wheel set the speed ’f/s’.
The function is shown in the display as
.
– Set the desired CINE speed using the setting
wheel.
– Contrast (chapter 5.4, page 18) and average
value measurements (chapter 5.5, page 19)
can also be carried out.
Using the switch DIP 2 additional CINE speeds
can be switched on.
9.2
Taking measurements in the CINE
function
– Take a measurement by pressing the
measuring button
– The measured f-stop appears both in the left
digital display (resolution 1/10 stop increments)
and as an indicator in the analogue aperture
scale rounded to the nearest 1/2 f-stop.