Gossen Starlite - Manual (Page 10)

10 GOSSEN Foto- und Lichtmeßtechnik
2.1.1 Automatic display illumination
When the lighting conditions are poor (about EV 4
or less), the background lighting of the display is
switched on automatically for 10 seconds.
2.2 Display duration
If the Starlite display panel is idle for about 2
minutes, it is switched off automatically.
The measuring values and the preset values
remain stored in memory.
– By pressing anyone of the buttons, you can
recall the measuring value from the memory.
– By pressing the measuring button , a new
measurement is taken.
The measuring values of the last measurement
remain stored in the memory until a new measure-
ment is taken.
The Starlite has separate memories for
ambient and flash light measuring.
2.3 Key Lock
It makes sense to activate the key lock to avoid
switching on the Starlite by accident.
– Activating the key lock: press
ISO and ISO2 simultaneously.
OFF, ISO and ISO2 appear for 3 seconds on
the display. Then the instrument switches off
automatically.
If you press any button, OFF, ISO and ISO2 are
displayed again for 3 seconds.
– Deactivating the key lock:
press ISO and ISO2 simultaneously.