Gossen Starlite User Manual

Page 16

GOSSEN Foto- und Lichtmeßtechnik

Measuring functions – Ambient light

– Select with the left function button

ambient

light

(the last stored measuring value

appears in the display).

– Keep the function button pressed down and

select the corresponding sub-function using
the setting wheel. This function is displayed
in a frame

– Set the desired value using the setting wheel

alone.

5.1

Aperture priority

– Press the measuring button

to take a

measurement.

– The measured exposure time appears on

the right digital display. The f-number is auto-
matically adjusted to the time measured in
1/10 stop increments. Furthermore, the
f-number, which is rounded to 1/2 stop
increments, is displayed as a mark on the
analogue scale.

– Other shutter speed/f-stop combinations

can be selected using the setting wheel.

Note:
When preselecting f-stop, the stored values
of the last measurement are displayed in 1/10 stop
increments. These are, however, irrelevant, since
a new reading has to be taken.