Gossen Starlite - Manual (Page 11)

GOSSEN Foto- und Lichtmeßtechnik 11
3 Operating elements
3.1 ISO – ISO2
Selecting the film speed
You can select two different film speeds with the
ISO and ISO2 buttons.
– Select the film speed by pressing and holding
"ISO" or "ISO2". ISO or ISO2 will flash on the
display panel.
– Set the desired ISO value using the setting
wheel.
When another operating function is selected,
the preset film speed is retained in the Starlite
memory.
The film speed you have selected, either ISO or
ISO2, appears in the top right corner of the display
panel (ISO2 as long as the ISO2 button is pres-
sed).
When the ISO2 button is pressed, the converted
shutter speed/f-stop values are displayed on the
basis of the last measuring. Therefore, you no
longer have to carry out time consuming calcula-
tions when working with 2 films of different speeds.
If the film speed is changed, the last measuring
value is converted to the new ISO settings.
The selected film speed is memorized until it is
changed in accordance with the above mentioned
procedure.