E-flite Edge 540 BP 3D ARF - Manual (Page 8)

8 E-flite Edge 540 BP ARF Assembly Manual
Airframe Assembly
Required Parts
Fuselage
Wing Stabilizer
Required Tools and Adhesives
Felt-tipped pen
Ruler
String
Hobby knife w/#11 blade
Thin CA
Sandpaper
 1. Locate the wing and fuselage. Slide the wing into the
fuselage and center it as shown in the drawing. Use either a
ruler or a ruler and string to ensure the dimensions are the
same as shown.
A=A
A A
Hint: Use the opening in the bottom of the wing for the
servos to help in alignment.
  2. Use a felt-tipped pen to trace the outline of the fuselage
onto the top and bottom of the wing.
  3. Remove the wing and use a hobby knife with a
sharp #11 blade to remove the covering from the
wing
1 /
16
-inch (1.5mm) inside the lines drawn.