E-flite Edge 540 BP 3D ARF - Manual (Page 26)

E-flite Edge 540 BP ARF Assembly Manual
Note: Check that your motor has right thrust. The motor
will be angled towards the right when viewed from the
top of the aircraft as shown.
Important Information About Your Brushless ESC
Make sure your ESC brake is programmed to Off. Also,
be sure to use an ESC with the proper 9V cutoff when
using 3-cell Li-Po packs, or 6V cutoff when using 2-cell
Li-Po packs.
 5. Solder any necessary connectors onto the speed control
for the motor and battery. Plug the motor into the speed
control. Attach the speed control to the fuselage using hook
and loop tape. Plug the speed control into the throttle port of
your receiver.