beautypg.com

E-flite Edge 540 BP 3D ARF User Manual

Page 23

background image

3

E-flite Edge 540 BP ARF Assembly Manual

14. The installation of the elevator linkage follows the same

procedure as the aileron linkage. Remove the covering for

the pushrod guide only on the side that the guide inserts

from. Position the guide so the linkage can move freely. Use

thin CA to glue the guide to the fuselage.

15. The last linkage to install is for operating the rudder.

The long 13-inch (330mm) carbon pushrod is used for the

rudder. Follow the same procedure as the elevator pushrod,

including the installation of the pushrod guide.