E-flite Mini Edge 3D ARF - Manual (Page 36)

36
Canopy Install
Required Parts
Fuselage Canopy
Required Tools and Adhesives
Canopy glue Wax paper
Felt-tipped pen
150–220 grit sandpaper
 1. Place a piece of wax paper between the rear of the
canopy hatch and fuselage.
 3. Install the battery in the fuselage using the remaining
piece of hook and loop material. The battery must
be mounted at the forwardmost position against the
firewall for proper Center of Gravity. Installing the
battery into that position may be tight. The best way is
to install under the wing joiner and above the rudder
servo. Be sure not to damage the pack when installing
or removing the battery.
Hint : You may use a piece of hook and loop
strapping around the battery to help secure
it in position.