E-flite Mini Edge 3D ARF - Manual (Page 13)

13
  3. Slide the aileron into position. Check to make
sure it can move without interference at the wing
root. Remove the T-pins and apply Thin CA to each
hinge. Make sure the hinge is fully saturated with CA.
Use a paper towel to clean up any excess CA from
the wing and aileron. Make sure to apply CA to both
sides of the hinge.
  4. Firmly grasp the wing and aileron and gently pull
on the aileron to ensure the hinges are secure and
cannot be pulled apart. Use caution when gripping the
wing and aileron to avoid crushing the structure.