Banner PresencePLUS Lighting - Manual (Page 2)

Specifications
Description Feature
Visible red LED (630 nm), Infrared (880 nm), Blue (470 nm), White (5500 K), or Green
(530 nm), depending on model
Light Source
24V dc ± 10% 500 mA max., 125 mA max for 50 mm models. Direct connect to Pres-
ence
PLUS P4 sensor operating at 24V dc only.
Supply Voltage and
Current
Housing: Aluminum with black anodizing
Construction
Beam Splitter: Optical glass with optical coatings on both sides.
Diffuser: High-precision cast acrylic
Dust Cover: Optical glass with broadband anti-reflective coating (425 – 675 nm) (some
models)
When operated within specifications, output will decrease less than 20% after 10,000
hours and less than 30% after 20,000 hours (based on continuous operation). NOTE:
Actual useful life of strobed lights depends on duty cycle.
Useful Life
Temperature: 0° to +50° C (+32° to +122° F)
Maximum Relative Humidity: 90% at 50° C (non-condensing) Operating Conditions
Regularly remove any dust, dirt, or fingerprints from the light source:
1. Blow off dust using anti-static compressed air.
Cleaning Instructions 2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining
debris.
Do not use any other chemicals for cleaning.
Before installing an on-axis light, it is recommended that the listed ambient light filter be
installed behind the camera lens.
Installation Note
The filter improves image quality by reducing unwanted ambient light.
100 mm models: 50 x 50 mm suggested field of view and 25 mm minimum suggested
stand off
50 mm models: 25 x 25 mm suggested field of view and 25 mm minimum suggested
stand off
P/N 126059 rev.
-
Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
2
LED..O..M Series Diffused On-Axis Lights