Brother P2500 - Manual (Page 105)

4-18
Image default examples Recommendation
ABCDEFGH
abcdefghijk
A B C D
a b c d e
0 1 2 3 4
Page skew
•
Make sure the paper or other media is loaded into the
paper cassette correctly and that the guides are not
too tight or too loose against the paper stack.
•
Set the paper guides correctly. Make sure that the
tip of the paper guides fit into the slot correctly.
See
“How to load paper into the Paper cassette” in
Chapter 1.
•
If you are using the manual feed slot see "How to
load one sheet of paper manually" in Chapter 1.
•
The paper input bin may be too full. See "How to
load paper into the paper cassette" in Chapter 2.
•
Check the paper type and quality. See "What kind of
paper can I use" in Chapter 1.
Curl or wave
•
Check the paper type and quality. Both high
temperature and high humidity will cause paper to
curl.
See “What kind of paper can I use” in Chapter
1.
•
If you use the printer infrequently, the paper may
have been in the paper cassette too long. Turn over
the stack of paper in the paper input tray. Also, try
rotating the paper 180
°
in the paper cassette.
•
Try printing using the straight-through output path.
See "How to load one sheet of paper manually" in
Chapter 1.
B DEFGH
abc efghijk
A C D
b c d e
1 3 4
Wrinkles or creases
•
Make sure that paper is loaded properly. See "How
to load paper into the paper cassette" in Chapter 1.
•
Check the paper type and quality. See “What kind
of paper can I use” in Chapter 1.
•
Try printing using the straight-through output path.
See "How to load one sheet of paper manually" in
Chapter 1.
•
Turn over the stack of paper in the tray or try
rotating the paper 180
°
in the input tray.