Belkin F5D6231-4 - Manual (Page 75)

Manually Configuring Network Settings in Windows 98 or Me
1. Right-click on “My Network Neighborhood” and select “Properties” from the
drop-down menu.
2. Select “TCP/IP -> settings” for your installed network adapter. You will see the
following window.
3. If “Specify and IP address” is selected, your Router will need to be set up for
a static IP connection type. Write the address information in the table below.
You will need to enter this information into the Router.
4. Write the IP address and subnet mask from the “IP Address” tab (3).
5. Click the “Gateway” tab (2). Write the gateway address down in the chart.
6. Click the “DNS Configuration”
tab (1). Write the DNS
address(es) in the chart.
7. If not already selected, select
“Obtain IP address
automatically” on the IP
address tab. Click “OK”.
Restart the computer. When
the computer restarts, your
network settings are now configured for use with the Router.
MANUALLY CONFIGURING NETWORK SETTINGS
73
(2)
(3) (1)
P74122_F5D6231-4_man.qxd 11/6/02 1:04 PM Page 73