Belkin F5D6231-4 - Manual (Page 26)

ALTERNATE SETUP METHOD
24
RED. The indicator is automatically updated when you make changes to
the settings of the Router.
4. Login/Logout Button
This button enables you to log in and out of the Router with the press of
one button. When you are logged into the Router, this button will change
to read “Logout”. Logging into the Router will take you to a separate
login page where you will need to enter a password. When you are logged
in to the Router, you can make changes to the settings. When you are
finished making changes, you can log out of the Router by clicking the
“Logout” button. For more information about logging into the Router, see
the section called “Logging into the Router”.
5. Help Button
The “Help” button gives you access to the Router’s help pages. Help is
also available on many pages by clicking “more info” next to certain
sections of each page.
6. LAN Settings
Shows you the settings of the Local Area Network (LAN) side of the
Router. Changes can be made to the settings by clicking on any one of
the links (IP Address, Subnet Mask, DHCP Server) or by clicking the “LAN”
Quick Navigation link on the left side of the screen.
7. Features
Shows the status of the Router’s NAT, firewall, and wireless features.
Changes can be made to the settings by clicking on any one of the links
or by clicking the “Quick Navigation” links on the left side of the screen.
8. Internet Settings
Shows the settings of the Internet/WAN side of the Router that connects
to the Internet. Changes to any of these settings can be made by clicking
on the links or by clicking on the “Internet/WAN” Quick Navigation link
on the left side of the screen.
9. Version Info
Shows the firmware version, boot-code version, hardware version, and
serial number of the Router.
10. Page Name
The page you are on can be identified by this name. This manual will
sometimes refer to pages by name. For instance “LAN > LAN Settings”
refers to the “LAN Settings” page.
P74122_F5D6231-4_man.qxd 11/6/02 1:04 PM Page 24