Belkin F5D6231-4 - Manual (Page 52)

USING THE WEB-BASED ADVANCED USER INTERFACE
50
Setting Client IP Filters
The Router can be configured to restrict access to the Internet, e-mail, or other
network services at specific days and times. Restriction can be set for a single
computer, a range of computers, or multiple computers.
To restrict Internet access to a single computer for example, enter the IP address
of the computer you wish to restrict access to in the IP fields (1). Next, enter
“88” in both the port fields (2). Select “Both” (3). Select “Block” (4). You can
also select “Always” to block access all of the time. Select the day to start on
top (5), the time to start on top (6), the day to end on the bottom (7), and
the time to stop (8) on the bottom. Select “Enable” (9). Click “Apply Changes”.
The computer at the IP address you specified will now be blocked from Internet
access at the times you specified. Note: Be sure you have selected the correct
time zone under “Utilities> System Settings> Time Zone”.
(1) (2)
(9) (3) (4) (7) (8)
(5) (6)
P74122_F5D6231-4_man.qxd 11/6/02 1:04 PM Page 50