Belkin F5D6231-4 - Manual (Page 22)

ALTERNATE SETUP METHOD
20
The Advanced User Interface is a web-based tool that you can use to set up the
Router if you don’t want to use the Easy Install Wizard. You can also use it to
manage advanced functions of the Router. From the Advanced User Interface, you
can perform the following tasks:
• View the Router’s current settings and status.
• Configure the Router to connect to your ISP with the settings that they
provided you change the current network settings such as the Internal IP
address, the IP address pool, DHCP settings and more.
• Set the Router’s firewall to work with specific applications (port
forwarding).
• Set up security features such as client restrictions and MAC address
filtering.
• Enable the DMZ feature for a single computer on your network.
• Change the Router’s internal password.
• Enable/Disable UPnP (Universal Plug-and-Play).
• Reset the Router.
• Back up your configuration settings.
• Reset the Router’s default settings.
• Update the Router’s firmware.
Alternative Method Step 1: Connecting your Gateway/Router
1.1 Turn off the power to your modem by unplugging the power supply from
the modem.
1.2 Locate the network cable that is connected between your modem and
your computer and unplug it from your computer, leaving the other end
connected to your modem.
1.3 Plug the loose end of the cable you just unplugged into the port on the
back of the Router labeled “Internet/WAN”.
1.4 Connect a new network cable (not included) from the back of the
computer to one of the ports labeled “1–4”. Note: It does not matter
which numbered port you choose.
1.5 Turn your cable or DSL modem on by reconnecting the power supply to
the modem.
P74122_F5D6231-4_man.qxd 11/6/02 1:04 PM Page 20