Belkin F5D6231-4 - Manual (Page 18)

CONNECTING AND CONFIGURING YOUR CABLE/DSL ROUTER
16
4.3 When the transfer is complete, the Wizard will tell you that it is done and
may reboot (restart) the Router.
4.4 When configuration is complete, the Wizard will tell you “Router Setup
Complete” and it will move to the next step.
4.5 Checking Internet
The Wizard will now check for an Internet connection. This can take a few
minutes. The Wizard may not detect a connection right away. If not, it
will retry a number of times. The “Connected” light on the front panel of
the Router will flash during this time. Please be patient through this
process. If at the end of this process the Wizard cannot connect to the
P74122_F5D6231-4_man.qxd 11/6/02 1:03 PM Page 16