Metrohm 850 Professional IC Anion MSM-HC - Manual (Page 70)

3.18 Conductivity detector
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
60 ￭￭￭￭￭￭￭￭
850 Professional IC Anion – MSM-HC
1
3
2
Figure 33 Conductivity detector rear
1 Detector cable
With mounted plug. 2 Detector outlet capillary
Permanently installed.
3 Type plate
With serial number.
Note
In order to prevent unnecessary peak widening after separation, the
connection between the outlet of the separation column and the inlet
in the detector should be kept as short as possible.
Connecting the detector inlet capillary to the MSM-HC
1 ￭ Connect the detector inlet capillary (34-1) and the capillary of the
MSM-HC (34-2) labeled with Detector to one another using one
6.2744.040 coupling (34-3) and two 6.2744.070 short pressure
screws (34-4).