Metrohm 914 pH / Conductometer - Manual (Page 62)

4.8 pH measurement
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
52 ￭￭￭￭￭￭￭￭
pH Meter/Conductometer
4.8.2 Measurement
NOTE
Measured value criteria
You can set the various criteria for defining the measured value deter-
mination as follows (see Chapter 4.7.3, page 40):
1 Selecting the printout criterion
￭ If the measured value found is to be directly printed out as a mea-
sured value report, then you have to set the required printout cri-
terion (see Chapter 4.5.3, page 28).
2 Selecting the measured value criterion
￭ This criterion defines the conditions as to when the measured
value is saved on the instrument and/or printed out.
3 Carrying out the measurement
￭ Rinse the sensor with water and immerse it in the sample.
￭ Select the Print/save measured value button with the
keys.
￭ Trigger printing and/or saving of the measured value with the
key.