Metrohm 914 pH / Conductometer - Manual (Page 39)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Operation
pH Meter/Conductometer
￭￭￭￭￭￭￭￭ 29
2
Use the key to change to the menu structures.
Toggling from one-channel to two-channel view
The view can be changed in instruments with two measuring channels.
Three views can be displayed as follows:
￭ Display with both measuring channels.
￭ Display with measuring channel 1 and the data ID1, ID2 and User.
￭ Display with measuring channel 2 and the data ID1, ID2 and User.
1
You can toggle between the views as needed with the or
arrow keys.
Printing and/or saving measured values
Measured value recording is started with the Print/save measured
value button.
￭ - Printing the measured values.
￭ - Printing and saving the measured values.
￭ - Saving the measured values.
The respective triggering is determined by the settings in the menu:
￭ Menu ▶ Measured values ▶ Values
and
￭ Menu ▶ Measured values ▶ Data
(see Chapter 4.7.3, page 40).
4.5.4 Menu dialog
The further menu structures, editing dialogs and selection dialogs can be
selected in the menu dialog.