Metrohm 914 pH / Conductometer - Manual (Page 13)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1 Introduction
pH Meter/Conductometer
￭￭￭￭￭￭￭￭ 3
1.1.3 Interfaces
You can connect a printer or establish a connection with a PC for data
transfer (PC/LIMS report and CSV format) using the USB interface.
1.1.4 Sensors
Metrohm offers various sensors for specific measurements.
NOTE
For more information on the theoretical background, please refer to the
Metrohm monograph Electrodes in Potentiometry.
1.2 Intended use
This instrument is suitable for measuring in chemicals and flammable sam-
ples. Usage of the pH Meter/Conductometer therefore requires the user to
have basic knowledge and experience in handling toxic and caustic sub-
stances. Knowledge with respect to the application of the fire prevention
measures prescribed for laboratories is also mandatory.
1.3 About the documentation
CAUTION
Please read through this documentation carefully before putting the
instrument into operation. The documentation contains information
and warnings which the user must follow in order to ensure safe opera-
tion of the instrument.
1.3.1 Symbols and conventions
The following symbols and formatting may appear in this documentation:
Cross-reference to figure legend
The first number refers to the figure number, the sec-
ond to the instrument part in the figure.
Instruction step
Carry out these steps in the sequence shown.
Method Dialog text, parameter in the software