Metrohm 914 pH / Conductometer - Manual (Page 37)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Operation
pH Meter/Conductometer
￭￭￭￭￭￭￭￭ 27
Figure 13 Operation - main dialog, two-channel
1 Battery state of charge
(see Chapter 4.3.1, page 24). 2 Menu access
(see "Accessing the menu structures", page
28).
3 Sensor condition
(see Chapter 4.3.3, page 25). 4 Display measuring channel 1
5 Calibration interval display
Time in days until the next calibration is due. 6 Display measuring channel 2
7 Print/save measured value
Button for the functions print, save or
print+save.
Both measured values are printed and/or
saved. 8 Date/time display
NOTE
The procedure for functions of the main dialog with two measuring
channels is the same as for the main dialog with one measuring chan-
nel:
￭ (see "Accessing the menu structures", page 28).
￭ (see "Toggling from one-channel to two-channel view", page 29).
4.5.2 Main dialog with one measuring channel
The corresponding measuring channel is displayed according to the selec-
tion.
In addition, the display and input fields ID1, ID2 and User are displayed in
the main dialog with one measuring channel.