Metrohm 899 Coulometer - Manual (Page 93)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Parameters
899 Coulometer
￭￭￭￭￭￭￭￭ 83
Result unit
The result unit is displayed and saved together with the result.
R1
Selection
% | mg | mg/piece | mg/g | mg/mL | ppm | µg |
User-defined
Default value ppm
R2-R5
Selection
% | mg | mg/piece | mg/g | mg/mL | ppm | µg |
User-defined
Default value %
User-defined
A user-defined unit can be created. This will be added to the selection
list. The previous entry will be overwritten as soon as the new unit has
been defined. A blank entry can be generated this way as well.
Save as CV
The calculated result can be saved as a method-independent variable, a
so-called common variable. The result is then also available in other meth-
ods for calculations. If Statistics has been activated, then the current mean
value of the determination series will be saved.
Selection on | off
Default value off
Method "KFC-Blank"
Result name
The result name is the text which will be shown in the results display and
in the report.
Entry 12 characters
Default value R1: Water / R2-R5: empty
Calculation formula "R1"
(EP1–CV01)/C00
CV01 is the Common Variable 01 and corresponds to the result from the
calculation of the Method "Blank", page 84.
R2…R5
Display of the calculation formula. A special editor is opened for the defi-
nition (see Chapter 5.3, page 39).
Entry 30 characters
Default value empty