Metrohm 899 Coulometer - Manual (Page 109)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
10 Appendix
899 Coulometer
￭￭￭￭￭￭￭￭ 99
3 Confirming the initialization
Note
If the request is not confirmed within 8 s, then the procedure will
be canceled.
￭ Press [BACK] twice.
Initialization is started. The process takes approximately 80 s. The
instrument will be automatically restarted after successful initializa-
tion.
10.7 Remote interface
10.7.1 Pin assignment of the remote interface
1
5
6
9
5
1
9
6
Figure 27 Pin assignment of remote socket and remote plug
The above figure of the pin assignment applies for all Metrohm instru-
ments with 9-pin D-Sub remote connector.
Table 8 Inputs and outputs of the remote interface
Pin No. Assignment Function
1 Output 0 Ready/EOD
2 Output 1 -
3 Output 2 Titration
4 Output 3 Cond OK
5 Output 4 Error
6 0 volt (GND)
7 +5 volts
8 Input 0 Start
9 Input 1 Stop