Metrohm 858 Professional Sample Processor - Manual (Page 56)

7.1 Lift and turntable ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
48 ￭￭￭￭￭￭￭￭ 858 Professional Sample Processor
7 Technical data
7.1 Lift and turntable
Stroke path 235 mm
Maximum lift load Approx. 30 N
Lift rate Adjustable, 5…25 mm/s
Shift rate Adjustable, 3...20 angle degrees/sec
7.2 786 Swing Head
Maximum load Approx. 15 N
Swing rate 10...55 angle degrees/sec
Beaker sensor
connector M8 socket
7.3 Two-channel peristaltic pump
Pump rate 6…90 rpm, adjustable in 15 steps each in both directions of rotation
Typical flow rate 0.3 mL/min at 18 rpm; with standard pump tubing 6.1826.320
The effective flow rate is dependent on contact pressure and type of
tubing.
Maximum pres-
sure 4 bar (0.4 MPa)
Conveyable fluids Clear fluids without solids
Tubing materials PVC (Tygon® ST), PVC (Tygon® LFL), PP