Metrohm 858 Professional Sample Processor - Manual (Page 18)

2.3 Connector strip ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
10 ￭￭￭￭￭￭￭￭ 858 Professional Sample Processor
2.3 Connector strip
USB 2
USB 1 Contr.
MSB 1
MSB 2 MSB 3
Made by Metrohm
Herisau Switzerland
P: 115W U: 100 - 240 V f: 50 - 60 Hz WARNING - Fire Hazard -
For continued protection replace only
with the same type and rating of fuse
Nr
.
1 2 3 4 5
Figure 3 Connector strip 858 Professional Sample Processor
1 USB connectors 2 Controller connector
For the connection to the PC
3 MSB connectors
For dosing devices, stirrers, etc. 4 Mains connection
5 Type plate
2.4 Sample racks
Figure 4 Sample rack with sample vessels
A sample rack is a turntable that acts as a receptacle for sample vessels.
Various types of sample racks are available for different numbers and
types of sample vessels. The 858 Professional Sample Processor requires
sample racks with up to a maximum of 42 cm in diameter or smaller.
Attaching a rack
Attach the sample racks in such a way that the guide pins of the turntable
engage through the guide openings in the base of the rack.