Metrohm 850 Professional IC Anion MCS Gradient - Manual (Page 116)

6.8 Sample degasser
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
106 ￭￭￭￭￭￭￭￭
850 Professional IC –Anion – MCS – Gradient
Pressure range
Pump 0…50.0 MPa (0…500 bar)
Pump head 0…35.0 MPa (0…350 bar) (applies for the standard PEEK pump head)
Residual pulsa-
tion < 1 %
Safety shutdown
Function Automatic shutdown upon reaching the pressure limit values
Maximum pres-
sure limit ￭ Adjustable from 0.1…50 MPa (1…500 bar)
￭ The pump is automatically shut down at the first piston stroke
above the maximum limit value
Minimum pres-
sure limit ￭ Adjustable from 0…49 MPa (0…490 bar)
￭ The shutdown mechanism is inactive at 0 MPa
￭ The shutdown mechanism only becomes active 2 minutes after sys-
tem start
￭ The pump is automatically shut down after 3 piston strokes below
the minimum pressure limit
Gradient capacity Isocratic or gradient (extendable to quaternary)
Profile Step, linear, convex and concave
Resolution < 1 nL/min flow increments
6.8 Sample degasser
Material fluoropolymer
Resistance to sol-
vents No restriction (apart from PFC)
Build-up time for
the vacuum < 60 s
6.9 Injection valve
Actuator time typ.100 ms
Max. operating
pressure 35 MPa (350 bar)
Material PEEK