BMW III - Manual (Page 29)

26 BMW Motorrad Navigator III Owner’s Manual
a
PPendix
Step 2: Connect AC Power
Connect the enclosed AC power cable to the
power connector on the back of the Navigator
III. Connect the end to an available electrical
outlet.
Step 3: Connect the USB Cable
Use the USB cable provided to connect the
Navigator III to your computer. Also use the
USB cable when updating the Navigator III
software or loading additional maps.
To connect your Navigator III to your
computer:
1. Plug the small end of the USB cable into
the connector located on the back of your
Navigator III
2.. Connect.the.larger.end.of.the.USB.
cable to an available USB port on your
computer.
Updating the Software and Map
Data
1. Load the USB drivers using the enclosed
DVD-ROM. See the previous page ..
2. Connect the AC cable to the power
connector on the back of the Navigator III.
Turn on the Navigator III
3. Connect the USB cable to your Navigator
III.and.your computer.
4.. Go.to .www.garmin.com/products/
BMWNavigatorIII ..Select. Updates and
Downloads ..
5.. Click. Download .next.to.the.unit.software..
6. Read and agree to the terms. Click
Download ..
7.. Select. Run (or Open ). Your software is
updated.
You can also use WebUpdater to update your
Navigator III software. Go to www.garmin
.com/products/webupdater to learn about
WebUpdater.
Check
www.garmin.com/unlock/update.jsp
to see if an update for your map software is
available.
To find out the version of the maps that are
loaded on your Navigator III, open the Main
menu. Touch Settings > About > Detail Maps .
To load maps to your Navigator III, see the
MapSource Help file.
Loading Extras
Your Navigator III accepts custom points of
interest (POI) databases, including Garmin
TourGuide POIs available from various
companies on the Internet. Some custom POI
databases contain alert information for points,
such as safety cameras and school zones.
Your Navigator III can notify you when you
approach one of these points.
After downloading your POI database, use the
Garmin POI Loader to install the POIs into
your unit. The POI Loader is available at www
.garmin.com/products/poiloader. Select
Updates and Downloads . Refer to the POI
Loader Help file for more information; press F1
to open the Help file.