Main controller, Led indicator – DJI Wookong-H User Manual
Page 6
©2012 DJI Innovations. All Rights Reserved.
6 |
Main Controller
Where? There is no orientation requirement for the Main Controller. Maintain at least a 20-centimeter-distance between the
Main Controller and the engine or motor. Choose a mounting location where as shorter servo extension wires are needed as
possible. This helps reduce the risks of electronic interference. Please also make sure the USB port is accessible when installing
the Main Controller so as to facilitate software configuration.
After choosing a location to mount the Main Controller, it is recommended that you DO NOT mount the Main Controller until
all wirings and software configurations are completed.
LED Indicator
Where? Place the LED indicator at appropriate location of helicopter body.
Make sure the LED indicator face down, and you can see the light.