Component location function – CommScope Redwood version 2.1 User Manual
Page 5
SSYSTEM INSTALLATION GUIDE
www.redwoodsystems.com
5
Component
Location
Function
Redwood Sensor &
Adapter Enclosure
Installed over
Redwood Adapter
or Sensor
Sites without a drop ceiling may
utilize this Enclosure to be placed
around the standard Adapter Card or
Sensor.
Redwood Manager
control software
Accessible via web
browsers that can
connect to the
Redwood subnet
Enables commissioning, the
management of lighting policies,
reporting, and maintenance tracking.
Redwood Dimmer
Wall switch with
sensing capabilities
Wall-mounted
Allows for manual light manipulation
and can sense motion, ambient light
and ambient temperature.
Redwood Scene
Control Wall switch
with scene selection
and sensing
capabilities
Wall-mounted
Allows for selecting a scene and
manual light manipulation and can
sense ambient temperature.
Redwood Wall
Mount Kit for
mounting the Engine
against a wall
Wiring closet or
central office
The Redwood Engine can be
installed flush against a wall using
the Redwood Wall Mount Kit
Redwood Universal
Gateway Wiring
Harness to the dry
contact relay
Installed above
ceiling
Connect the Dry Contact Relay for
the fixture to the Universal Gateway
using the provided Redwood
Universal Gateway wiring harness.
Redwood Patch
Cord with RJ45
connector for
connecting engines
and patch panels
Located on rack
units where
Engines are
installed
Connects Engine outputs to standard
RJ45 patch panels for category
cabling installs.