CommScope Redwood version 2.1 - Manual (Page 3)

SSYSTEM INSTALLATION GUIDE
www.redwoodsystems.com 3
1 Redwood System Installation Guide
This System Installation Guide provides general overview instructions for installing the following
components of the Redwood lighting system:
• Redwood Director
• Redwood Engine
• Redwood Sensors, Gateways, and Adapters
• Redwood Wall Switches
• Redwood compatible fixtures
• Electrical wiring (to Redwood Engines)
• Low-voltage cabling (to Redwood compatible fixtures)
For information on the Redwood Manager or help in commissioning light fixtures, see the Redwood User
& Commissioning Guide.
For detailed product-specific installation instructions, see the respective Installation Guides.
IMPORTANT NOTE
The Redwood Engine, Director, Sensors and Gateways are designed for commercial use only and
are not for household use.
1.1 Installation Preparation
The following sections provide an overview of Redwood’s structural design, architecture and
components. It will also discuss the requirements and recommendations for the installation process.
1.2 High-Level Architecture
Redwood Building-Performance Lighting Platform