CommScope Redwood version 2.1 - Manual (Page 17)

SSYSTEM INSTALLATION GUIDE
www.redwoodsystems.com 17
4.8 Install Redwood Sensors
The Redwood Sensor must be installed within 6 feet (1.8m) of each fixture. Determine where in the
ceiling tile the Redwood Sensor needs to be installed.
For more details, see the Redwood Sensor Installation Instruction manual.
4.9 Install Redwood Adapters
The Redwood Adaptors have an integrated sensor and card and do note require a separate Gateway. They
are typically installed about 2 inches from the fixture, but with a Redwood LED Fixture extension cable,
can be up to 2 feet away from the fixture. Determine where in the ceiling tile the Redwood Adaptors
needs to be installed or use the enclosed adaptor option.
4.10 The Redwood Sensor & Adapter Enclosure Box
Sites without a drop ceiling may require the Redwood Sensor & Adapter Enclosure to be placed around
the standard Redwood Adapter or Sensor. The closed box and an exploded view with the installed
Adapter are shown in the adjacent figure.