Clay Paky HandsOn - Manual (Page 5)

Handson Manual
2 I
NSTALLING
D
RIVERS
This chapter provides step-by-step instructions for installing the USB driver
for the CueCable interface.
2.2 H
ANDSON ON
M
AC
OS
OR
L
INUX
Just connect the CueCable to a free USB port on your Apple or Linux
computer; Mac OS and Linux do not require a specifc driver for the CueCable.
2.1 H
ANDSON ON
W
INDOWS
Handson comes with drivers for both 64-bit and
32-bit versions of Windows XP, Vista and 7. The
drivers are bundled with the application and
copied to your computer by our installer tool.
Please use this tool for installing the drivers and
ignore any 'New Hardware Found' popup dialogs
from Windows.
The installer will automatically detect whether
your Windows system is 64-bit or 32-bit and select
the appropriate drivers.
If you have already installed the driver before and
you would just like to install an update for the
Handson application then you can skip installing
the drivers again.
Installing under 64-bit
Follow the instruction in the installer-wizard. During the
installation of the driver Windows might prompt you several
times to confrm if you would like to install the driver from
'Jungo'; this is the name of the vendor of this specifc driver.
Please confrm that you would like to install this driver.
p 4
Illustration 1: CueCable