Clay Paky HandsOn - Manual (Page 18)

Handson Manual
7.3 M
ODIFYING A
C
UELIST VIA THE MENU
Next to working in the Main view, you can also edit
cuelists via the CUE menu. Although you can create a
new cuelist in the CUE menu, the menu is more setup
for modifying cuelists once created in the Main view.
To change an existing cuelist, open the CUE menu.
Select a Cuelist and click EDIT to open the Cuelist editor.
Here you can edit the properties of the CUELIST and the
individual cues.
The following properties can be set for the cuelist:
Chase
When CHASE is enabled, the cuelist will no longer
follow the cues’ timings and conditions. The cuelist will
be played back as a chase. The cross-fade can be
changed using the ATTAK slider. The speed of the chase
is linked to the main Chase tempo, which can be found
at the bottom left of the Handson window. All cuelists
set to CHASE will run synchronous to this tempo.
In the Cuelist Editor, you can also specify a tempo
divider for the chase.
1/1: Chase will step further on every beat of the main
chase tempo.
1/2: Chase will step further once in every 2 beats of the main chase tempo.
1/4: Chase will step further once in every 4 beats of the main chase tempo
Etc.
Speed
Speed controls the playback speed of the cuelist. 50% refects normal playback speed, with the
programmed timing per cue. Changing the playback speed will scale the timing for all cues in the cuelist.
7.4 M
ODIFYING A
C
UE VIA THE MENU
The following properties can be set per cue:
Label
The label is the name of the cue for your reference.
p 17